ipv6 vrrp <1-255> accept-mode enable

Configures the master or backup master router to accept packets destined to the IPv6 address associated with the virtual router

Syntax

default ipv6 vrrp <1-255> accept-mode enable
ipv6 vrrp <1-255> accept-mode enable
no ipv6 vrrp <1-255> accept-mode enable

Command Parameters

<1-255>: Specifies a number that uniquely identifies a virtual router on an interface. The virtual router acts as the default router for one or more assigned addresses.

Default

The default is disabled.

Command Mode

GigabitEthernet Interface Configuration

9039038-00 Rev AA